Ignition Control Circuit Low Voltage
1995-2005 Pontiac Sunfire 2.2L I4
Description
The PCM detected lower than expected voltage on the ignition control circuit when the circuit should be high.
Symptoms
- Check Engine Light
- Engine misfires
- Rough running
- Intermittent no-start
Common Causes
- Open or short to ground in IC circuit
- Faulty ignition control module
- Damaged wiring
- Poor connection at IC module
Diagnostic Steps
- Test IC circuit voltage
- Check for opens or shorts to ground
- Inspect wiring and connectors
- Test ignition module
Repair Notes
Repair wiring or replace ignition module.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1361 on Other Vehicles
Pontiac Aztek
2001-2005 3.4L V6
Pontiac Bonneville
1990-1999 3.8L V6
Pontiac Bonneville
2000-2005 3.8L V6
Pontiac Bonneville GXP
2000-2005 4.6L V8
Pontiac Bonneville GXP
2000-2005 4.6L V8 Northstar
Pontiac Bonneville SSEi
1992-1999 3.8L Supercharged V6
Pontiac Bonneville SSEi
1992-1999 3.8L V6 Supercharged
Pontiac Firebird
1993-1997 3.4L V6
Common Questions
What does code P1361 mean on a 1995-2005 Pontiac Sunfire?
P1361 stands for "Ignition Control Circuit Low Voltage". The PCM detected lower than expected voltage on the ignition control circuit when the circuit should be high.
What are the symptoms of P1361 on a Pontiac Sunfire?
Common symptoms of P1361 include: Check Engine Light, Engine misfires, Rough running, Intermittent no-start.
What causes P1361 on a 1995-2005 Pontiac Sunfire?
Common causes of P1361 include: Open or short to ground in IC circuit, Faulty ignition control module, Damaged wiring, Poor connection at IC module.