P2763
Torque Converter Clutch Pressure Control Solenoid Control Circuit High
1995-2005 Pontiac Sunfire 2.2L I4
High SeverityPowertrainGeneric (SAE)
Description
High voltage/current on TCC pressure control solenoid circuit.
Symptoms
- TCC not engaging
- Check engine light
- Reduced fuel economy
Common Causes
- Open ground
- Short to voltage
- Solenoid coil open
Diagnostic Steps
- Measure solenoid resistance
- Check circuit voltage
- Inspect ground
Repair Notes
Replace solenoid or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P2763 on Other Vehicles
Pontiac Aztek
2001-2005 3.4L V6
Pontiac Bonneville
1990-1999 3.8L V6
Pontiac Bonneville
2000-2005 3.8L V6
Pontiac Bonneville GXP
2000-2005 4.6L V8
Pontiac Bonneville GXP
2000-2005 4.6L V8 Northstar
Pontiac Bonneville SSEi
1992-1999 3.8L Supercharged V6
Pontiac Bonneville SSEi
1992-1999 3.8L V6 Supercharged
Pontiac Firebird
1993-1997 3.4L V6
Common Questions
What does code P2763 mean on a 1995-2005 Pontiac Sunfire?
P2763 stands for "Torque Converter Clutch Pressure Control Solenoid Control Circuit High". High voltage/current on TCC pressure control solenoid circuit.
What are the symptoms of P2763 on a Pontiac Sunfire?
Common symptoms of P2763 include: TCC not engaging, Check engine light, Reduced fuel economy.
What causes P2763 on a 1995-2005 Pontiac Sunfire?
Common causes of P2763 include: Open ground, Short to voltage, Solenoid coil open.