ABS Isolation Valve Solenoid Circuit
2003-2010 Porsche Cayenne 3.2L V6
Description
Malfunction in the ABS isolation valve solenoid, used to isolate the master cylinder from the ABS modulator.
Symptoms
- ABS light on
- Brake pedal feels unusual
- ABS not functioning
- Pedal sinks during ABS activation
Common Causes
- Isolation valve solenoid failure
- ABS module internal fault
- Wiring open or short
- Contaminated brake fluid
Diagnostic Steps
- Test solenoid resistance through connector
- Command isolation valve with scan tool
- Check brake fluid condition
- Inspect module connector pins
Repair Notes
Replace ABS modulator assembly. Bleed brake system thoroughly.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0059 on Other Vehicles
Porsche 718 Boxster
2017-2024 2.0L H4 Turbo
Porsche 718 Boxster
2017-2024 2.0L Turbo H4
Porsche 718 Boxster GTS
2020-2024 4.0L H6
Porsche 718 Boxster S
2017-2024 2.5L Turbo H4
Porsche 718 Cayman
2017-2024 2.0L H4 Turbo
Porsche 718 Cayman
2017-2024 2.0L Turbo H4
Porsche 718 Cayman GT4
2019-2024 4.0L H6
Porsche 718 Cayman GTS
2020-2024 4.0L H6
Common Questions
What does code C0059 mean on a 2003-2010 Porsche Cayenne?
C0059 stands for "ABS Isolation Valve Solenoid Circuit". Malfunction in the ABS isolation valve solenoid, used to isolate the master cylinder from the ABS modulator.
What are the symptoms of C0059 on a Porsche Cayenne?
Common symptoms of C0059 include: ABS light on, Brake pedal feels unusual, ABS not functioning, Pedal sinks during ABS activation.
What causes C0059 on a 2003-2010 Porsche Cayenne?
Common causes of C0059 include: Isolation valve solenoid failure, ABS module internal fault, Wiring open or short, Contaminated brake fluid.