Invalid Data Received from Steering Angle Sensor
1998-2002 Rolls-Royce Silver Seraph 5.4L V12
Description
Data from the steering angle sensor is invalid or out of expected range.
Symptoms
- Stability control disabled
- Power steering warning
- ESC light on
- Steering angle not centered
Common Causes
- Steering angle sensor calibration lost
- Sensor failure
- CAN bus noise
- Clock spring issue
- Sensor wiring fault
Diagnostic Steps
- Check steering angle sensor reading
- Perform steering angle calibration
- Test sensor output through full lock-to-lock
- Check clock spring
- Inspect sensor wiring
Repair Notes
Perform steering angle sensor calibration. Common after alignment, battery disconnect, or steering work.
Related Codes
Other Network Codes
- U0001High Speed CAN Communication Bus
- U0002High Speed CAN Communication Bus Performance
- U0003High Speed CAN Communication Bus (+) Open
- U0004High Speed CAN Communication Bus (+) Low
- U0005High Speed CAN Communication Bus (+) High
- U0006High Speed CAN Communication Bus (-) Open
- U0007High Speed CAN Communication Bus (-) Low
- U0008High Speed CAN Communication Bus (-) High
- U0009High Speed CAN Communication Bus Shorted Together
- U0010Medium Speed CAN Communication Bus
U0426 on Other Vehicles
Rolls-Royce Corniche
2000-2002 6.75L V8
Rolls-Royce Cullinan
2019-2024 6.75L V12 Twin Turbo
Rolls-Royce Dawn
2016-2024 6.6L V12 Twin Turbo
Rolls-Royce Ghost
2010-2024 6.6L V12 Twin Turbo
Rolls-Royce Phantom VII
2003-2017 6.75L V12
Rolls-Royce Phantom VIII
2018-2024 6.75L V12 Twin Turbo
Rolls-Royce Silver Spirit
1990-1998 6.75L V8
Rolls-Royce Silver Spur
1990-1998 6.75L V8
Common Questions
What does code U0426 mean on a 1998-2002 Rolls-Royce Silver Seraph?
U0426 stands for "Invalid Data Received from Steering Angle Sensor". Data from the steering angle sensor is invalid or out of expected range.
What are the symptoms of U0426 on a Rolls-Royce Silver Seraph?
Common symptoms of U0426 include: Stability control disabled, Power steering warning, ESC light on, Steering angle not centered.
What causes U0426 on a 1998-2002 Rolls-Royce Silver Seraph?
Common causes of U0426 include: Steering angle sensor calibration lost, Sensor failure, CAN bus noise, Clock spring issue, Sensor wiring fault.