P1335
No Crankshaft Position Sensor Signal
2013-2016 Scion FR-S 2.0L H4
Critical SeverityPowertrain
Description
The ECM lost the CKP sensor signal while engine is running, causing timing loss.
Symptoms
- CEL
- Stalling
- Intermittent misfires
- No-start
- Loss of power
Common Causes
- Faulty CKP sensor
- Damaged wiring
- Excessive air gap
- Damaged reluctor wheel
Diagnostic Steps
- Test CKP sensor resistance
- Check air gap
- Inspect wiring
- Check reluctor wheel
Repair Notes
Replace CKP sensor or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1335 on Other Vehicles
Common Questions
What does code P1335 mean on a 2013-2016 Scion FR-S?
P1335 stands for "No Crankshaft Position Sensor Signal". The ECM lost the CKP sensor signal while engine is running, causing timing loss.
What are the symptoms of P1335 on a Scion FR-S?
Common symptoms of P1335 include: CEL, Stalling, Intermittent misfires, No-start, Loss of power.
What causes P1335 on a 2013-2016 Scion FR-S?
Common causes of P1335 include: Faulty CKP sensor, Damaged wiring, Excessive air gap, Damaged reluctor wheel.