P0336
Crankshaft Position Sensor A Circuit Range/Performance
2016-2016 Subaru Forester 2.5L H4
High SeverityPowertrainGeneric (SAE)
The 2016 Subaru Forester is equipped with a 2.5L flat-4 engine. Below you'll find detailed p0336 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The CKP sensor signal is erratic or out of expected pattern.
Symptoms
- Check Engine Light
- Rough running
- Stalling
- Misfire
Common Causes
- Damaged reluctor ring teeth
- Excessive sensor gap
- Sensor contamination
- Tone ring wobble
Diagnostic Steps
- Scope CKP signal
- Inspect reluctor ring
- Check air gap
- Look for debris on sensor
Repair Notes
Inspect reluctor ring and sensor. Replace as needed.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0336 on Other Vehicles
Common Questions
What does code P0336 mean on a 2016-2016 Subaru Forester?
P0336 stands for "Crankshaft Position Sensor A Circuit Range/Performance". The CKP sensor signal is erratic or out of expected pattern.
What are the symptoms of P0336 on a Subaru Forester?
Common symptoms of P0336 include: Check Engine Light, Rough running, Stalling, Misfire.
What causes P0336 on a 2016-2016 Subaru Forester?
Common causes of P0336 include: Damaged reluctor ring teeth, Excessive sensor gap, Sensor contamination, Tone ring wobble.
Last updated: March 2026