P0617high severityPowertrain
Starter Motor Relay Circuit High
on 2010-2012 Subaru Legacy 3.6L H6 · AWD
What this code means
High voltage in starter relay circuit.
Symptoms
- Starter engaged too long
- Starter running after engine starts
Common causes
- Short to power
- Relay stuck
- Ignition switch sticking
Diagnostic steps
- Test relay
- Check for shorts
- Test ignition switch
Repair notes
Replace relay. Check ignition switch. Do not ignore - can damage starter.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1