P0732
Gear 2 Incorrect Ratio
2012-2012 Subaru Legacy 3.6L H6
High SeverityPowertrainGeneric (SAE)
The 2012 Subaru Legacy is equipped with a 3.6L flat-6 engine. Below you'll find detailed p0732 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
Incorrect gear ratio detected in 2nd gear.
Symptoms
- Slipping in 2nd
- Harsh shifting around 2nd
Common Causes
- 2nd gear clutch pack worn
- Shift solenoid issue
- Valve body problem
Diagnostic Steps
- Check fluid
- Test solenoids
- Monitor 2nd gear ratio
Repair Notes
Service transmission.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0732 on Other Vehicles
Common Questions
What does code P0732 mean on a 2012-2012 Subaru Legacy?
P0732 stands for "Gear 2 Incorrect Ratio". Incorrect gear ratio detected in 2nd gear.
What are the symptoms of P0732 on a Subaru Legacy?
Common symptoms of P0732 include: Slipping in 2nd, Harsh shifting around 2nd.
What causes P0732 on a 2012-2012 Subaru Legacy?
Common causes of P0732 include: 2nd gear clutch pack worn, Shift solenoid issue, Valve body problem.
Last updated: March 2026