U0136low severityNetwork
Lost Communication with Leveling Control Module
on 2013 Subaru Legacy 2.5L H4 · AWD
What this code means
Cannot communicate with the automatic leveling or load-leveling suspension module.
Symptoms
- Headlight auto-leveling disabled
- Vehicle sitting unevenly
- Leveling warning message
Common causes
- Leveling module failure
- CAN bus wiring
- Module power loss
- Height sensor issue
Diagnostic steps
- Check leveling module fuse
- Test power and ground
- Check CAN wiring
- Test height sensors
- Inspect leveling actuators
Repair notes
Check fuses and height sensor operation. Common issue after suspension work.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus