Brake Booster Performance
2017-2020 Tesla Model 3 Standard Range Plus Single Motor RWD
Description
The brake booster is not providing adequate assist, detected by pressure sensor or pedal effort monitoring.
Symptoms
- Hard brake pedal
- Increased stopping distance
- Brake warning light on
- Engine may stall when brakes applied firmly
Common Causes
- Leaking brake booster diaphragm
- Cracked or disconnected vacuum hose
- Check valve failure
- Brake booster control valve stuck
- Low engine vacuum on turbocharged vehicles
Diagnostic Steps
- Perform brake booster leak-down test
- Check vacuum hose and check valve
- Test engine vacuum at idle
- Apply brakes with engine off then start engine (pedal should drop)
- Check booster operating rod adjustment
Repair Notes
Replace brake booster if diaphragm is leaking. Replace vacuum hose or check valve as needed.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0091 on Other Vehicles
Tesla Cybertruck
2024-2024 Cyberbeast Tri Motor AWD
Tesla Cybertruck
2024-2024 Dual Motor AWD
Tesla Cybertruck
2024-2024 Single Motor RWD
Tesla Model 3
2017-2020 Long Range Dual Motor AWD
Tesla Model 3
2017-2020 Performance Dual Motor AWD
Tesla Model 3
2021-2024 Long Range Dual Motor AWD
Tesla Model 3
2021-2024 Performance Dual Motor AWD
Tesla Model 3
2021-2024 Standard Range Single Motor RWD
Common Questions
What does code C0091 mean on a 2017-2020 Tesla Model 3?
C0091 stands for "Brake Booster Performance". The brake booster is not providing adequate assist, detected by pressure sensor or pedal effort monitoring.
What are the symptoms of C0091 on a Tesla Model 3?
Common symptoms of C0091 include: Hard brake pedal, Increased stopping distance, Brake warning light on, Engine may stall when brakes applied firmly.
What causes C0091 on a 2017-2020 Tesla Model 3?
Common causes of C0091 include: Leaking brake booster diaphragm, Cracked or disconnected vacuum hose, Check valve failure, Brake booster control valve stuck, Low engine vacuum on turbocharged vehicles.