Immobilizer Transponder Authentication Failure
2019-2019 Tesla Model 3 Performance Dual Motor AWD
The 2019 Tesla Model 3 is equipped with a Performance Dual Motor AWD engine (AWD). Below you'll find detailed b0102 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The immobilizer detected a transponder signal but authentication failed. The key code does not match the stored code.
Symptoms
- Engine cranks but will not start
- Security light solid on
- Key rejected by system
Common Causes
- Key not programmed to this vehicle
- Immobilizer module lost key memory
- Aftermarket key with incorrect code
- Immobilizer control module failure
Diagnostic Steps
- Try all registered keys
- Check key programming status
- Attempt key relearn procedure
- Scan immobilizer module codes
- Verify VIN match in immobilizer
Repair Notes
Reprogram key to vehicle using manufacturer procedure. May require dealer tool.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0009Rear Center Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
B0102 on Other Vehicles
Tesla Cybertruck
2024-2024 Cyberbeast Tri Motor AWD
Tesla Cybertruck
2024-2024 Dual Motor AWD
Tesla Cybertruck
2024-2024 Single Motor RWD
Tesla Model 3
2017-2017 Long Range Dual Motor AWD
Tesla Model 3
2017-2017 Performance Dual Motor AWD
Tesla Model 3
2017-2017 Standard Range Plus Single Motor RWD
Tesla Model 3
2018-2018 Long Range Dual Motor AWD
Tesla Model 3
2018-2018 Performance Dual Motor AWD
Common Questions
What does code B0102 mean on a 2019-2019 Tesla Model 3?
B0102 stands for "Immobilizer Transponder Authentication Failure". The immobilizer detected a transponder signal but authentication failed. The key code does not match the stored code.
What are the symptoms of B0102 on a Tesla Model 3?
Common symptoms of B0102 include: Engine cranks but will not start, Security light solid on, Key rejected by system.
What causes B0102 on a 2019-2019 Tesla Model 3?
Common causes of B0102 include: Key not programmed to this vehicle, Immobilizer module lost key memory, Aftermarket key with incorrect code, Immobilizer control module failure.
Last updated: March 2026