Brake Apply Circuit
2024-2024 Tesla Model 3 Standard Range Single Motor RWD
The 2024 Tesla Model 3 is equipped with a Standard Range Single Motor RWD engine (RWD). Below you'll find detailed c0110 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The ABS/stability control module detects a general fault in the brake apply sensing circuit.
Symptoms
- ABS light on
- Cruise control not working
- Shift lock may not release
- Stability control disabled
Common Causes
- Brake light switch failure
- Brake pedal position sensor fault
- Wiring issue in brake apply circuit
- ABS module input failure
Diagnostic Steps
- Test brake light switch
- Test brake pedal position sensor
- Check brake light fuse
- Inspect wiring between switch and ABS module
- Verify both brake switch inputs
Repair Notes
Replace brake light switch or repair wiring in brake apply circuit.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0110 on Other Vehicles
Tesla Cybertruck
2024-2024 Cyberbeast Tri Motor AWD
Tesla Cybertruck
2024-2024 Dual Motor AWD
Tesla Cybertruck
2024-2024 Single Motor RWD
Tesla Model 3
2017-2017 Long Range Dual Motor AWD
Tesla Model 3
2017-2017 Performance Dual Motor AWD
Tesla Model 3
2017-2017 Standard Range Plus Single Motor RWD
Tesla Model 3
2018-2018 Long Range Dual Motor AWD
Tesla Model 3
2018-2018 Performance Dual Motor AWD
Common Questions
What does code C0110 mean on a 2024-2024 Tesla Model 3?
C0110 stands for "Brake Apply Circuit". The ABS/stability control module detects a general fault in the brake apply sensing circuit.
What are the symptoms of C0110 on a Tesla Model 3?
Common symptoms of C0110 include: ABS light on, Cruise control not working, Shift lock may not release, Stability control disabled.
What causes C0110 on a 2024-2024 Tesla Model 3?
Common causes of C0110 include: Brake light switch failure, Brake pedal position sensor fault, Wiring issue in brake apply circuit, ABS module input failure.
Last updated: March 2026