Back to 2010 Toyota 4Runner

2010 TOYOTA 4RUNNER

4.0L V64WDAUTOMATICgas
12 active safety recalls on this vehicle — view recalls
Repairs0Labor520Torque3907Fluid9DTC910Battery1Maintenance0Recalls12
C0405low severityChassis

ACC Sensor Blocked

on 2010 Toyota 4Runner 4.0L V6 · 4WD

What this code means

The adaptive cruise control sensor reports its view is obstructed.

Symptoms

  • ACC temporarily unavailable message
  • Sensor blocked warning on dash
  • ACC disengages in bad weather

Common causes

  • Mud, snow, or ice covering sensor area
  • Aftermarket grille or bumper cover blocking sensor
  • Heavy rain or fog
  • Damaged sensor cover or radome

Diagnostic steps

  1. Clean radar sensor cover or camera lens
  2. Inspect bumper fascia sensor opening
  3. Check for aftermarket parts blocking sensor
  4. Verify no damage to sensor radome
  5. Test in clear weather to confirm resolution

Repair notes

Clean sensor area thoroughly. Remove any aftermarket obstructions. Replace damaged radome.

Other Chassis codes on this vehicle

Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →