ShopBaseComplete shop management for auto repair shops Β· $249/mo
Try ShopBase β†’
B0110

Keyless Entry System General Fault

2014-2014 Toyota 4Runner 4.0L V6

Low SeverityBodyGeneric (SAE)

The 2014 Toyota 4Runner is equipped with a 4.0L V6 engine. Below you'll find detailed b0110 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.

Description

A general malfunction in the keyless entry system. The system is not responding to remote key fob commands.

Symptoms

  • Remote lock/unlock not working
  • Key fob buttons unresponsive
  • Must use physical key
  • All remote functions lost

Common Causes

  • Dead key fob battery
  • Faulty keyless entry receiver
  • Antenna issue
  • BCM keyless entry module failure
  • RF interference

Diagnostic Steps

  1. Replace key fob battery
  2. Test with second key fob
  3. Check keyless entry antenna
  4. Scan BCM for related codes
  5. Check for RF interference sources

Repair Notes

Replace key fob battery first. If issue persists, check receiver module and antenna.

Related Codes

B0111Keyless Entry Receiver CircuitB0112Key Fob Signal Weak or Intermittent

Other Body Codes

B0110 on Other Vehicles

Common Questions

What does code B0110 mean on a 2014-2014 Toyota 4Runner?

B0110 stands for "Keyless Entry System General Fault". A general malfunction in the keyless entry system. The system is not responding to remote key fob commands.

What are the symptoms of B0110 on a Toyota 4Runner?

Common symptoms of B0110 include: Remote lock/unlock not working, Key fob buttons unresponsive, Must use physical key, All remote functions lost.

What causes B0110 on a 2014-2014 Toyota 4Runner?

Common causes of B0110 include: Dead key fob battery, Faulty keyless entry receiver, Antenna issue, BCM keyless entry module failure, RF interference.

Last updated: March 2026

View Labor Times | View Torque Specs | View Fluid Specs | View Battery Specs