Surround View System Calibration
2017-2020 Toyota 86 2.0L H4
Description
The surround/360-degree view camera system requires recalibration after camera replacement or windshield service.
Symptoms
- Surround view image stitching incorrect
- Bird eye view distorted
- Camera views not aligned
- Calibration warning on display
Common Causes
- Camera replaced without recalibration
- Camera mounting shifted
- Windshield camera angle changed
- Software update required
- Vehicle alignment changed
Diagnostic Steps
- Attempt surround view calibration procedure
- Verify all cameras are properly mounted
- Check calibration target positioning
- Use dealer calibration tool
- Verify camera mounting angles
Repair Notes
Perform surround view camera calibration using manufacturer procedure and calibration targets.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0009Rear Center Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
B2302 on Other Vehicles
Toyota 4Runner
2010-2024 4.0L V6
Toyota Alphard
2023-2025 2.4L I4 Turbo T24A-FTS
Toyota Alphard
2023-2025 2.5L I4 Hybrid A25A-FXS
Toyota Aqua
2011-2021 1.5L I4 Hybrid 1NZ-FXE
Toyota Aqua
2021-2025 1.5L I3 Hybrid M15A-FXE
Toyota Avalon
2005-2012 3.5L V6
Toyota Avalon
2013-2018 2.5L I4
Toyota Avalon
2013-2018 3.5L V6
Common Questions
What does code B2302 mean on a 2017-2020 Toyota 86?
B2302 stands for "Surround View System Calibration". The surround/360-degree view camera system requires recalibration after camera replacement or windshield service.
What are the symptoms of B2302 on a Toyota 86?
Common symptoms of B2302 include: Surround view image stitching incorrect, Bird eye view distorted, Camera views not aligned, Calibration warning on display.
What causes B2302 on a 2017-2020 Toyota 86?
Common causes of B2302 include: Camera replaced without recalibration, Camera mounting shifted, Windshield camera angle changed, Software update required, Vehicle alignment changed.