Rain Sensor Sensitivity Calibration
2017-2020 Toyota 86 2.0L H4
Description
The rain sensor sensitivity calibration is outside expected parameters or has been lost.
Symptoms
- Auto wipers too sensitive or not sensitive enough
- Wipers not responding proportionally to rain
- Auto wiper delay incorrect
Common Causes
- Sensor calibration lost after battery disconnect
- Windshield replacement affected calibration
- Sensor contamination
- Software update needed
Diagnostic Steps
- Attempt rain sensor recalibration via scan tool
- Clean sensor area thoroughly
- Check for windshield tint or coating near sensor
- Verify sensor mounting
- Check for software updates
Repair Notes
Recalibrate rain sensor. Clean windshield in sensor area. Replace sensor if recalibration fails.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0009Rear Center Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
B2AAB on Other Vehicles
Toyota 4Runner
2003-2009 4.0L V6
Toyota 4Runner
2003-2009 4.7L V8
Toyota 4Runner
2010-2024 4.0L V6
Toyota Alphard
2023-2025 2.4L I4 Turbo T24A-FTS
Toyota Alphard
2023-2025 2.5L I4 Hybrid A25A-FXS
Toyota Aqua
2011-2021 1.5L I4 Hybrid 1NZ-FXE
Toyota Aqua
2021-2025 1.5L I3 Hybrid M15A-FXE
Toyota Avalon
2005-2012 3.5L V6
Common Questions
What does code B2AAB mean on a 2017-2020 Toyota 86?
B2AAB stands for "Rain Sensor Sensitivity Calibration". The rain sensor sensitivity calibration is outside expected parameters or has been lost.
What are the symptoms of B2AAB on a Toyota 86?
Common symptoms of B2AAB include: Auto wipers too sensitive or not sensitive enough, Wipers not responding proportionally to rain, Auto wiper delay incorrect.
What causes B2AAB on a 2017-2020 Toyota 86?
Common causes of B2AAB include: Sensor calibration lost after battery disconnect, Windshield replacement affected calibration, Sensor contamination, Software update needed.