Back to 2007 Toyota Camry

2007 TOYOTA CAMRY

2.4L I4FWDAUTOMATICgas
10 active safety recalls on this vehicle — view recalls
Repairs0Labor469Torque2466Fluid6DTC855Battery1Maintenance0Recalls10
C0105moderate severityChassis

Brake Pedal Position Sensor Circuit Low

on 2007 Toyota Camry 2.4L I4 · FWD

What this code means

The brake pedal position sensor signal voltage is below the minimum threshold.

Symptoms

  • ABS light on
  • Brake assist fault
  • Module reads brake as always applied

Common causes

  • Short to ground in sensor circuit
  • Faulty sensor
  • Low supply voltage to sensor

Diagnostic steps

  1. Test sensor signal voltage
  2. Check for shorts to ground
  3. Verify supply voltage at sensor
  4. Inspect wiring harness

Repair notes

Repair short circuit or replace brake pedal position sensor.

Other Chassis codes on this vehicle

Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →