What this code means

The DCT clutch A actuator is not reaching the commanded position. The hydraulic or electromechanical actuator cannot properly engage or disengage clutch A.

Symptoms

• Check Engine Light
• Harsh shifts in odd gears
• Gear grinding noise
• Failure to engage 1st gear
• Transmission jerking
• Stuck in neutral

Common causes

• Faulty clutch actuator motor
• Hydraulic fluid leak in actuator circuit
• Actuator position sensor failure
• Mechanical binding in actuator
• Low hydraulic pressure

Diagnostic steps

1. Read clutch A actuator position PID
2. Command actuator through full range
3. Check hydraulic fluid level
4. Inspect actuator for leaks
5. Test actuator motor and position sensor

Repair notes

Replace clutch actuator assembly or repair hydraulic circuit. Perform clutch teach-in procedure after replacement.

Other Powertrain codes on this vehicle