P1300
Igniter Circuit Malfunction No. 1
2000-2005 Toyota Echo 1.5L I4
High SeverityPowertrain
Description
The ECM is not receiving the IGF signal from ignition coil No. 1.
Symptoms
- CEL
- Misfire cylinder 1
- Rough idle
- Poor acceleration
- Stalling
Common Causes
- Faulty ignition coil
- Damaged coil harness
- Poor connector
- Bad spark plug
Diagnostic Steps
- Test coil resistance
- Inspect connector
- Swap coils to test
- Check spark plug gap
Repair Notes
Replace ignition coil No. 1.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1300 on Other Vehicles
Common Questions
What does code P1300 mean on a 2000-2005 Toyota Echo?
P1300 stands for "Igniter Circuit Malfunction No. 1". The ECM is not receiving the IGF signal from ignition coil No. 1.
What are the symptoms of P1300 on a Toyota Echo?
Common symptoms of P1300 include: CEL, Misfire cylinder 1, Rough idle, Poor acceleration, Stalling.
What causes P1300 on a 2000-2005 Toyota Echo?
Common causes of P1300 include: Faulty ignition coil, Damaged coil harness, Poor connector, Bad spark plug.