P0200
Injector Circuit/Open
1998-1998 Volvo 960 3.0L I6
Moderate SeverityPowertrainGeneric (SAE)
The 1998 Volvo 960 is equipped with a 3.0L inline-6 engine. Below you'll find detailed p0200 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
General malfunction in the fuel injector circuit.
Symptoms
- Check Engine Light
- Rough idle
- Misfire
- Loss of power
Common Causes
- Faulty injector
- Wiring issue
- PCM driver failure
- Corroded connector
Diagnostic Steps
- Test injector resistance
- Inspect wiring
- Check PCM output
- Test injector operation with noid light
Repair Notes
Test each injector individually to isolate faulty unit.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0200 on Other Vehicles
Common Questions
What does code P0200 mean on a 1998-1998 Volvo 960?
P0200 stands for "Injector Circuit/Open". General malfunction in the fuel injector circuit.
What are the symptoms of P0200 on a Volvo 960?
Common symptoms of P0200 include: Check Engine Light, Rough idle, Misfire, Loss of power.
What causes P0200 on a 1998-1998 Volvo 960?
Common causes of P0200 include: Faulty injector, Wiring issue, PCM driver failure, Corroded connector.
Last updated: March 2026