P0342
Camshaft Position Sensor A Circuit Low Bank 1
2008-2008 Volvo S80 2.9L I6
High SeverityPowertrainGeneric (SAE)
The 2008 Volvo S80 is equipped with a 2.9L inline-6 engine. Below you'll find detailed p0342 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
Low or no signal from CMP sensor A Bank 1.
Symptoms
- Check Engine Light
- Hard starting
- No start
Common Causes
- Faulty sensor
- Short to ground
- Wiring issue
Diagnostic Steps
- Test sensor
- Check for shorts
- Inspect wiring
Repair Notes
Replace sensor or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0342 on Other Vehicles
Common Questions
What does code P0342 mean on a 2008-2008 Volvo S80?
P0342 stands for "Camshaft Position Sensor A Circuit Low Bank 1". Low or no signal from CMP sensor A Bank 1.
What are the symptoms of P0342 on a Volvo S80?
Common symptoms of P0342 include: Check Engine Light, Hard starting, No start.
What causes P0342 on a 2008-2008 Volvo S80?
Common causes of P0342 include: Faulty sensor, Short to ground, Wiring issue.
Last updated: March 2026