Back to 2010 Volvo XC90

2010 VOLVO XC90

4.4L V8AWDAUTOMATICgas
3 active safety recalls on this vehicle — view recalls
Repairs0Labor501Torque3665Fluid9DTC882Battery0Maintenance0Recalls3
C0079moderate severityChassis

Steering Position Sensor Circuit High

on 2010 Volvo XC90 4.4L V8 · AWD

What this code means

The steering angle sensor signal voltage is higher than the maximum expected value.

Symptoms

  • Stability control disabled
  • ESC light on
  • Incorrect steering position displayed

Common causes

  • Signal wire open circuit
  • Short to battery voltage
  • Sensor reference voltage issue
  • Sensor failure

Diagnostic steps

  1. Test signal voltage at sensor connector
  2. Check for open circuits in signal wire
  3. Verify reference voltage
  4. Monitor output through full range
  5. Inspect connector pins

Repair notes

Repair open circuit or replace steering angle sensor.

Other Chassis codes on this vehicle

Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →