2018-2023 Dodge Durango SRT Transfer Case Encoder Motor Labor Time
6.4L V8 SRT
Applies to 2018, 2019, 2020, 2021, 2022, and 2023 Dodge Durango SRT
1.5 hours
Range: NaN - NaN hours
Estimated confidence
💰 Estimated Labor Cost
$/hr
Low Estimate
$NaN
NaNh × $110
Typical
$165
1.5h × $110
High Estimate
$NaN
NaNh × $110
Labor only. Does not include parts, fluids, shop supplies, or taxes.
Related Jobs for This Vehicle
- 100K Service1.1 hrs
- 12V Auxiliary Battery2.5 hrs
- 30K Service3.3 hrs
- 4WD Actuator2.4 hrs
- 60K Service3.9 hrs
- 90K Service1.5 hrs
- ABS Module1.8 hrs
- ABS Pump1 hrs
Transfer Case Encoder Motor on Other Vehicles
Common Questions
How long does it take to transfer case encoder motor on a 2018-2023 Dodge Durango SRT?
The standard labor time for transfer case encoder motor on a 2018-2023 Dodge Durango SRT 6.4L V8 SRT is 1.5 hours. This can range from 1.2 to 1.8 hours depending on conditions and technician experience.
How much does transfer case encoder motor cost on a Dodge Durango SRT?
Labor cost for transfer case encoder motor on a 2018-2023 Dodge Durango SRT ranges from $90 to $270, with a typical cost around $165. This is labor only and does not include parts.
What is the labor rate for transfer case encoder motor?
At an independent shop ($110/hr), expect $165 for labor. Dealerships ($150/hr) charge around $225. Budget shops ($75/hr) may charge $113.