Transfer Case Encoder Motor
2007-2011 Dodge Nitro R/T 4.0L V6
2.3 hours
Range: NaN - NaN hours
Estimated confidence
💰 Estimated Labor Cost
$/hr
Low Estimate
$NaN
NaNh × $110
Typical
$253
2.3h × $110
High Estimate
$NaN
NaNh × $110
Labor only. Does not include parts, fluids, shop supplies, or taxes.
Related Jobs for This Vehicle
- 100K Service1.1 hrs
- 12V Auxiliary Battery1.3 hrs
- 30K Service2.7 hrs
- 4WD Actuator1.9 hrs
- 60K Service3.1 hrs
- 90K Service2.3 hrs
- ABS Module1.7 hrs
- ABS Pump1.5 hrs
Transfer Case Encoder Motor on Other Vehicles
Common Questions
How long does it take to transfer case encoder motor on a 2007-2011 Dodge Nitro R/T?
The standard labor time for transfer case encoder motor on a 2007-2011 Dodge Nitro R/T 4.0L V6 is 2.3 hours. This can range from 1.84 to 2.76 hours depending on conditions and technician experience.
How much does transfer case encoder motor cost on a Dodge Nitro R/T?
Labor cost for transfer case encoder motor on a 2007-2011 Dodge Nitro R/T ranges from $138 to $414, with a typical cost around $253. This is labor only and does not include parts.
What is the labor rate for transfer case encoder motor?
At an independent shop ($110/hr), expect $253 for labor. Dealerships ($150/hr) charge around $345. Budget shops ($75/hr) may charge $173.