1990-1993 Dodge Ram D150 Transfer Case Encoder Motor Labor Time
5.2L V8
Applies to 1990, 1991, 1992, and 1993 Dodge Ram D150
4.8 hours
Range: 3.8 - 5.8 hours
Estimated confidence
💰 Estimated Labor Cost
$/hr
Low Estimate
$418
3.8h × $110
Typical
$528
4.8h × $110
High Estimate
$638
5.8h × $110
Labor only. Does not include parts, fluids, shop supplies, or taxes.
Related Jobs for This Vehicle
- 100K Service5 hrs
- 30K Service2 hrs
- 4WD Actuator4.8 hrs
- 60K Service3 hrs
- 90K Service4 hrs
- ABS Module2 hrs
- ABS Pump2.5 hrs
- ABS Wheel Speed Sensor - Front0.8 hrs
Transfer Case Encoder Motor on Other Vehicles
Common Questions
How long does it take to transfer case encoder motor on a 1990-1993 Dodge Ram D150?
The standard labor time for transfer case encoder motor on a 1990-1993 Dodge Ram D150 5.2L V8 is 4.8 hours. This can range from 3.8 to 5.8 hours depending on conditions and technician experience.
How much does transfer case encoder motor cost on a Dodge Ram D150?
Labor cost for transfer case encoder motor on a 1990-1993 Dodge Ram D150 ranges from $285 to $870, with a typical cost around $528. This is labor only and does not include parts.
What is the labor rate for transfer case encoder motor?
At an independent shop ($110/hr), expect $528 for labor. Dealerships ($150/hr) charge around $720. Budget shops ($75/hr) may charge $360.