1990-2005 Mercury Sable Subframe Bushing Labor Time
3.0L V6
Applies to 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, and 2005 Mercury Sable
4 hours
Range: 3.2 - 4.8 hours
Estimated confidence
💰 Estimated Labor Cost
$/hr
Low Estimate
$352
3.2h × $110
Typical
$440
4h × $110
High Estimate
$528
4.8h × $110
Labor only. Does not include parts, fluids, shop supplies, or taxes.
Related Jobs for This Vehicle
- 100K Service5 hrs
- 30K Service2 hrs
- 60K Service3 hrs
- 90K Service4 hrs
- ABS Module2 hrs
- ABS Pump2.5 hrs
- ABS Wheel Speed Sensor - Front0.8 hrs
- ABS Wheel Speed Sensor - Rear0.8 hrs
Subframe Bushing on Other Vehicles
Common Questions
How long does it take to subframe bushing on a 1990-2005 Mercury Sable?
The standard labor time for subframe bushing on a 1990-2005 Mercury Sable 3.0L V6 is 4 hours. This can range from 3.2 to 4.8 hours depending on conditions and technician experience.
How much does subframe bushing cost on a Mercury Sable?
Labor cost for subframe bushing on a 1990-2005 Mercury Sable ranges from $240 to $720, with a typical cost around $440. This is labor only and does not include parts.
What is the labor rate for subframe bushing?
At an independent shop ($110/hr), expect $440 for labor. Dealerships ($150/hr) charge around $600. Budget shops ($75/hr) may charge $300.