2021 MITSUBISHI MIRAGE

Typical onset: 40,000-80,000 mi

Symptoms: Sudden loud knocking from engine bay, Metal shavings in oil, Loss of oil pressure, Check engine light with bearing-related codes, Engine seizes without warning

Fix: Complete engine replacement or rebuild required. The 1.2L 3-cylinder has seen premature bearing failures, often traced to oil starvation issues or manufacturing defects. Short block replacement takes 12-16 hours. Many owners report failures even with proper maintenance. Used engines are $1,500-2,500, remanufactured $3,000-4,000, plus 14-18 labor hours at $100-120/hr.

Estimated cost: $3,500-6,500

Typical onset: 50,000-90,000 mi

Symptoms: Shuddering or jerking during acceleration, Hesitation when shifting, Whining or grinding noises, Slipping between gears, Overheating transmission warnings

Fix: Jatco CVT used in this platform is notoriously problematic. Early cases may respond to fluid flush (3 hours) but most require CVT replacement. The transmission oil cooler often fails first, causing overheating and internal damage. Full CVT replacement is 8-12 hours. Remanufactured units run $2,500-3,500 plus fluids.

Estimated cost: $3,200-5,000

Typical onset: 60,000-100,000 mi

Symptoms: Transmission fluid leaking near radiator, Transmission running hot, Pink fluid under vehicle, Low transmission fluid warnings

Fix: The external CVT oil cooler and lines corrode or crack, especially in salt-belt states. If caught early before CVT damage occurs, cooler replacement is 2-3 hours. Problem is this often goes unnoticed until the CVT itself is damaged from running hot. Cooler assembly is $200-400 parts.

Estimated cost: $400-700

Typical onset: 50,000-100,000 mi

Symptoms: Excessive oil consumption (quart per 1,000 miles), Blue smoke from exhaust on startup, Fouled spark plugs, Loss of power, Engine misfires

Fix: The 3-cylinder engine has documented cases of piston ring failure leading to severe oil consumption. Requires engine teardown and piston ring replacement or full rebuild. If cylinder walls are scored, engine replacement is necessary. Ring job alone is 10-14 hours, but most shops won't warranty it without full rebuild.

Estimated cost: $2,500-5,000

Typical onset: 40,000-70,000 mi

Symptoms: Excessive vibration at idle, Clunking when shifting into gear, Engine rocks visibly when accelerating, Banging noise over bumps

Fix: The transmission mount on this platform is undersized for the CVT's weight and vibration. Rubber deteriorates quickly, especially with the 3-cylinder's inherent imbalance. Replacement is straightforward, 1.5-2 hours. OEM or aftermarket mounts are $80-150.

Estimated cost: $200-350

Symptoms: Hard starting, Rough idle, Loss of power, Check engine light with fuel trim codes, Engine stalling

Fix: The fuel filter and injectors on the 1.2L are sensitive to contamination. Some reports of manufacturing debris in fuel system from factory. Fuel filter replacement is 0.5 hours but access is tight. If injectors are damaged, all three need cleaning or replacement (2-3 hours). Injector set is $300-600.

Estimated cost: $150-900