Fuel Volume Regulator Control Circuit Range/Performance
2011-2011 Chevrolet Corvette 6.2L V8 LS3 🇲🇽
Description
The fuel volume regulator is not operating within expected parameters. The PCM monitors fuel pressure and compares it to the commanded value.
Symptoms
- Check Engine Light
- Engine surge
- Unstable idle
- Reduced power
Common Causes
- Fuel volume regulator sticking
- Low fuel pressure
- Contaminated fuel
- Wiring issue
Diagnostic Steps
- Monitor fuel pressure with scan tool
- Compare commanded vs actual pressure
- Inspect regulator for debris
- Check wiring harness
Repair Notes
Clean or replace fuel volume regulator.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
- P0016Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor A
P0002 on Other Vehicles
Chevrolet Astro
1996-1996 4.3L V6 Vortec
Chevrolet Astro
1997-1997 4.3L V6 Vortec
Chevrolet Astro
1998-1998 4.3L V6 Vortec
Chevrolet Astro
1999-1999 4.3L V6 Vortec
Chevrolet Astro
2000-2000 4.3L V6 Vortec
Chevrolet Astro
2001-2001 4.3L V6 Vortec
Chevrolet Astro
2002-2002 4.3L V6 Vortec
Chevrolet Astro
2003-2003 4.3L V6 Vortec
Common Questions
What does code P0002 mean on a 2011-2011 Chevrolet Corvette?
P0002 stands for "Fuel Volume Regulator Control Circuit Range/Performance". The fuel volume regulator is not operating within expected parameters. The PCM monitors fuel pressure and compares it to the commanded value.
What are the symptoms of P0002 on a Chevrolet Corvette?
Common symptoms of P0002 include: Check Engine Light, Engine surge, Unstable idle, Reduced power.
What causes P0002 on a 2011-2011 Chevrolet Corvette?
Common causes of P0002 include: Fuel volume regulator sticking, Low fuel pressure, Contaminated fuel, Wiring issue.
View Labor Times | View Torque Specs | View Fluid Specs | View Battery Specs