P1634low severityPowertrain
Accelerator Pedal Kickdown Switch
on 2023 BMW i7 M70 Dual Motor AWD · AWD
What this code means
The DME detected a fault in the accelerator pedal kickdown switch circuit. The kickdown switch signals full throttle request for transmission downshift. This is a convenience feature fault rather than a driveability concern.
Symptoms
- No kickdown during full throttle acceleration
- Transmission may not downshift when floored
- Check Engine Light
Common causes
- Faulty kickdown switch in accelerator pedal
- Wiring issue to kickdown switch
- Accelerator pedal module failure
- Connector corrosion
Diagnostic steps
- Test kickdown switch signal with scan tool while pressing pedal fully
- Inspect accelerator pedal connector
- Test switch continuity
- Check wiring to DME
Repair notes
Replace the accelerator pedal module if the kickdown switch is integrated and has failed.
Other Powertrain codes on this vehicle
P0070
Ambient Air Temperature Sensor Circuit
P0071
Ambient Air Temperature Sensor Range/Performance
P0072
Ambient Air Temperature Sensor Circuit Low
P0073
Ambient Air Temperature Sensor Circuit High
P0115
Engine Coolant Temperature (ECT) Sensor 1 Circuit
P0116
ECT Sensor 1 Circuit Range/Performance
P0117
ECT Sensor 1 Circuit Low Input
P0118
ECT Sensor 1 Circuit High Input
P0119
ECT Sensor 1 Circuit Intermittent
P0125
Insufficient Coolant Temperature for Closed Loop Fuel Control