1998 MITSUBISHI ECLIPSE

2.0L Turbo I4FWDAUTOMATICgasturbo
5-Year Cost of Ownership
$34,401 maintenance + known platform issues
~$6,880/yr · 570¢/mile equivalent · $4,929 maintenance + $8,622 expected platform issues
Compare this engine
vs
2.4L I4
vs
3.0L V6
vs
3.8L V6
Common Problems & Known Issues

The 2nd-gen Eclipse (especially the 2.0L turbo GST/GSX) is a performance icon with serious drivetrain fragility. Crankshaft walk on turbos and automatic transmission failure are the two deal-breakers that send more of these to the junkyard than rust ever could.

Crankshaft Walk (2.0L Turbo 4G63 DSM)

Common · high severity
Typical onset: 60,000-100,000 mi
Symptoms: Grinding noise from bellhousing area at idle, Clutch slipping or won't disengage fully, Metal shavings in oil or transmission fluid, Sudden loss of clutch function
Fix: Crankshaft thrust bearing failure lets crank slide fore-aft, destroying clutch disc and pressure plate. Requires full engine-out teardown, crank machining or replacement, thrust bearings, rear main seal, clutch kit. 18-24 hours labor plus machine work. Many owners opt for used JDM engine swap instead.
Estimated cost: $3,500-6,000

Automatic Transmission Failure (F4A33 4-Speed)

Common · high severity
Typical onset: 80,000-120,000 mi
Symptoms: Harsh or delayed 2-3 upshift, Slipping under load in 3rd or 4th gear, Whining noise in all gears, Limp mode or no movement after warm-up
Fix: The F4A33 cannot handle stock turbo torque long-term. Clutch packs burn, valve body sticks, and the torque converter fails. Rebuild with upgraded friction material runs 12-16 hours; most shops recommend reman or used trans swap. Cooler-line corrosion often contaminates fresh fluid quickly.
Estimated cost: $2,200-3,800

Turbocharger Failure (TD04/TD05)

Common · medium severity
Typical onset: 90,000-130,000 mi
Symptoms: Blue smoke on startup or deceleration, Loss of boost pressure above 3,500 RPM, Loud whistle or grinding from engine bay, Oil consumption over 1 qt per 1,000 mi
Fix: Mitsubishi TD-series turbos fail from oil starvation (clogged feed line screens) or shaft play from age. Also check downpipe for cracked flex section. Turbo replacement is 6-8 hours with manifold studs often breaking. OEM no longer available; aftermarket or used JDM unit required.
Estimated cost: $1,200-2,500

Head Gasket Failure (2.4L 4G64)

Occasional · medium severity
Typical onset: 110,000-150,000 mi
Symptoms: White smoke from exhaust on cold start, Coolant loss with no visible leaks, Overheating under load or highway driving, Milky residue on oil cap
Fix: The naturally-aspirated 2.4L suffers head gasket weeps between cylinders 2-3. Requires head removal, machining (often warped .008-.012 in), new bolts, timing belt, water pump while apart. 10-14 hours labor. The 2.0L non-turbo is less prone but shares similar symptoms.
Estimated cost: $1,400-2,200

Transfer Case Failure (GSX AWD Only)

Occasional · high severity
Typical onset: 100,000-140,000 mi
Symptoms: Clunking from center of car on turns, Vibration at 40-60 MPH that worsens, Rear wheels not engaging in snow, Gear oil leaking from viscous coupler seam
Fix: Viscous coupler overheats and locks or grenades internal gears. Trans/transfer case must come out together (16-20 hours). Used units from salvage are hit-or-miss; many owners convert to front-wheel drive with GST transmission swap for reliability.
Estimated cost: $2,800-4,500

Front Lower Ball Joint Separation (Recall 00V126000)

Occasional · high severity
Symptoms: Clunking over bumps from front wheel, Steering wander or pull to one side, Visible play when prying on wheel at 12/6 o'clock, Sudden loss of steering control (catastrophic)
Fix: NHTSA recall for ball joint detachment from control arm. Many were never completed. Replacement requires new lower control arm assemblies both sides, alignment. 3-4 hours labor. Check for service history proof; if never done, do immediately.
Estimated cost: $400-700

Fuel Pump Failure (In-Tank)

Occasional · medium severity
Typical onset: 120,000-160,000 mi
Symptoms: No-start or extended crank on hot days, Stumble or cut-out at 1/4 tank or less, Whining noise from rear seat area, Dying at highway speed then restarting later
Fix: OEM Mitsubishi pumps last well but aftermarket replacements fail early. Turbo models demand 255 LPH minimum. Access requires dropping tank (4-5 hours). Pre-pump filter screen often clogged with rust from old tank. Consider tank cleaning or POR-15 treatment during service.
Estimated cost: $600-1,000
Owner tips
  • Change oil every 3,000 mi on turbo models with full-synthetic; the 4G63 has tiny oil passages that clog and starve the crank thrust bearing and turbo
  • Inspect the oil pan for metal flake every oil change—early warning for crank walk before catastrophic failure
  • Replace timing belt and water pump together at 60k intervals; interference engine will destroy itself if belt snaps
  • Avoid automatic transmission models unless confirmed recent rebuild with heavy-duty clutch pack—the F4A33 is a ticking time bomb behind any turbo
  • Check for ball joint recall completion (00V126000) before purchase—this is a you-lose-steering-at-highway-speed issue
Buy a manual-trans turbo only if maintenance records prove religious oil changes and recent timing belt—otherwise you're gambling $4k on crank walk within 20k miles.
AI-assisted summary drawn from NHTSA recall data, our labor-times database, and platform knowledge. Not a substitute for a pre-purchase inspection on a specific vehicle.
479 jobs across 15 categories
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →