C0155moderate severityChassis

Regenerative Braking Torque Sensor Fault

on 2017 Acura ILX 2.4L I4 · FWD

What this code means

The torque sensor that monitors regenerative braking output is reporting invalid data.

Symptoms

  • Regen braking warning
  • Reduced energy recovery
  • Braking force inconsistent
  • Hybrid efficiency reduced

Common causes

  • Faulty regen torque sensor
  • Sensor wiring damaged
  • Motor-generator feedback fault
  • Sensor connector corroded

Diagnostic steps

  1. Read regen torque sensor data during braking
  2. Compare motor-generator actual torque to commanded
  3. Inspect sensor wiring
  4. Check sensor connector
  5. Test sensor through full range

Repair notes

Replace regen braking torque sensor. Recalibrate after replacement.

Other Chassis codes on this vehicle

⚠ STILL BEHIND THE PAYWALL
The 2017 Acura ILX repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Acura ILX — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →