P2440moderate severityPowertrain
Secondary Air Injection System Switching Valve Stuck Open Bank 1
on 2011 Audi S6 5.2L V10 · FWD
What this code means
The secondary air injection switching valve on bank 1 is stuck in the open position.
Symptoms
- Check engine light
- Failed emissions test
- Noise from air injection system
Common causes
- Carbon deposits in valve
- Failed diaphragm
- Broken valve spring
- Vacuum supply issue
Diagnostic steps
- Inspect valve operation
- Check vacuum supply
- Listen for air injection noise at idle
Repair notes
Replace secondary air switching valve.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1