C0505moderate severityChassis

Transfer Case Position Sensor Circuit

on 2014 Buick Enclave 3.6L V6 · AWD

What this code means

Malfunction in the sensor that reports the current transfer case range position.

Symptoms

  • 4WD indicator not showing correct mode
  • Service 4WD light
  • Transfer case may not shift
  • Unknown drive mode selected

Common causes

  • Faulty position sensor
  • Sensor wiring damage
  • Transfer case not fully engaged in any position
  • Sensor contaminated with fluid

Diagnostic steps

  1. Read transfer case position with scan tool
  2. Command mode change and watch sensor response
  3. Inspect sensor wiring
  4. Check transfer case fluid level and condition
  5. Test sensor resistance or voltage

Repair notes

Replace transfer case position sensor. Check fluid condition.

Other Chassis codes on this vehicle

⚠ STILL BEHIND THE PAYWALL
The 2014 Buick Enclave repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Buick Enclave — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →