P1361high severityPowertrain

Ignition Control Circuit Low Voltage

on 2017 Buick Enclave 3.6L V6 · AWD

What this code means

The PCM detected lower than expected voltage on the ignition control circuit when the circuit should be high.

Symptoms

  • Check Engine Light
  • Engine misfires
  • Rough running
  • Intermittent no-start

Common causes

  • Open or short to ground in IC circuit
  • Faulty ignition control module
  • Damaged wiring
  • Poor connection at IC module

Diagnostic steps

  1. Test IC circuit voltage
  2. Check for opens or shorts to ground
  3. Inspect wiring and connectors
  4. Test ignition module

Repair notes

Repair wiring or replace ignition module.

Other Powertrain codes on this vehicle

⚠ STILL BEHIND THE PAYWALL
The 2017 Buick Enclave repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Buick Enclave — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →