P2138critical severityPowertrain

Throttle/Pedal Position Sensor/Switch D/E Voltage Correlation

on 1999 Chevrolet Astro 4.3L V6 Vortec · RWD

What this code means

The dual accelerator pedal position sensors report conflicting values.

Symptoms

  • Limp mode
  • No throttle response
  • Check engine light
  • Engine at idle only

Common causes

  • Failed APP sensor
  • Corroded pedal connector
  • Wiring fault
  • 5V reference issue

Diagnostic steps

  1. Check APP sensor D and E voltages
  2. Verify 5V reference
  3. Inspect pedal connector

Repair notes

Replace accelerator pedal assembly. Check shared 5V reference circuit.

Other Powertrain codes on this vehicle

⚠ STILL BEHIND THE PAYWALL
The 1999 Chevrolet Astro repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Chevrolet Astro — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →