C0071moderate severityChassis

Yaw Rate Sensor Circuit

on 2011 Dodge Challenger 3.5L V6 · RWD

What this code means

Malfunction in the yaw rate sensor, which measures vehicle rotational speed around its vertical axis.

Symptoms

  • Stability control light on
  • ESC/VSC disabled
  • Vehicle stability assist inoperative
  • Traction control may also be disabled

Common causes

  • Faulty yaw rate sensor
  • Sensor mounting loose
  • Wiring harness damaged
  • ABS/stability control module failure

Diagnostic steps

  1. Read yaw rate sensor data with scan tool (should be near zero when stationary)
  2. Inspect sensor mounting and orientation
  3. Check wiring harness for damage
  4. Perform sensor calibration procedure
  5. Test sensor by slowly rotating vehicle

Repair notes

Calibrate yaw rate sensor. Replace if calibration fails or sensor output is erratic.

Other Chassis codes on this vehicle

⚠ STILL BEHIND THE PAYWALL
The 2011 Dodge Challenger repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Dodge Challenger — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →