Back to 2014 Ford Explorer

2014 FORD EXPLORER

3.5L V6 EcoBoostAWDAUTOMATICgasturbo
7 active safety recalls on this vehicle — view recalls
Repairs0Labor595Torque3760Fluid9DTC952Battery1Maintenance0Recalls7
P0121high severityPowertrain

Throttle/Pedal Position Sensor/Switch A Circuit Range/Performance

on 2014 Ford Explorer 3.5L V6 EcoBoost · AWD

What this code means

The TPS signal does not match expected values for the current operating conditions.

Symptoms

  • Check Engine Light
  • Erratic throttle response
  • Stalling
  • Hesitation
  • Limp mode

Common causes

  • Worn TPS
  • Carbon buildup on throttle body
  • Sticking throttle plate
  • Loose throttle cable

Diagnostic steps

  1. Monitor TPS signal during throttle sweep
  2. Check for flat spots or dropouts
  3. Clean throttle body
  4. Inspect throttle cable/linkage

Repair notes

Clean throttle body. Replace TPS if signal is erratic.

Other Powertrain codes on this vehicle

Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →