2018 FORD FLEX

3.5L V6 EcoBoostAWDAUTOMATICgasturbo
3 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P1506moderate severityPowertrain

Idle Air Control Overspeed Error

on 2018 Ford Flex 3.5L V6 EcoBoost · AWD

What this code means

The engine idle speed is too high. The PCM has detected that idle RPM exceeds the target idle speed and the IAC system cannot bring it down. The engine may be idling at 2000+ RPM.

Symptoms

  • Check Engine Light
  • Idle speed too high
  • Engine races at idle
  • Vehicle creeps forward in gear

Common causes

  • Vacuum leak (most common)
  • IAC valve stuck open
  • Throttle plate not closing fully
  • Throttle body carbon buildup preventing closure
  • Faulty IAC valve
  • Intake manifold gasket leak

Diagnostic steps

  1. Check for vacuum leaks with engine running — spray carb cleaner around intake
  2. Inspect throttle body for carbon preventing plate closure
  3. Test IAC valve — disconnect and check if idle drops
  4. Clean throttle body and IAC passages
  5. Inspect intake manifold gaskets

Repair notes

Find and repair vacuum leak. Clean throttle body. Replace IAC valve if stuck open.

Other Powertrain codes on this vehicle

⚠ STILL BEHIND THE PAYWALL
The 2018 Ford Flex repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ford Flex — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →