P1700high severityPowertrain

Transmission Indeterminate Failure

on 2013 Ford Focus Electric Motor · FWD

What this code means

The PCM/TCM has detected an indeterminate transmission failure. The transmission has failed to a neutral state. This is a general transmission failure code that may accompany more specific codes.

Symptoms

  • Check Engine Light
  • Transmission slipping
  • Harsh shifts
  • Vehicle in limp mode
  • Transmission may default to one gear

Common causes

  • Internal transmission failure
  • Solenoid pack failure
  • Valve body issue
  • Low transmission fluid
  • Transmission control module failure

Diagnostic steps

  1. Check for additional transmission DTCs for more specific diagnosis
  2. Check transmission fluid level and condition
  3. Inspect transmission wiring connector
  4. Monitor transmission pressures with scan tool

Repair notes

Check for companion DTCs. Check fluid level first. May require transmission disassembly for internal failure.

Other Powertrain codes on this vehicle

⚠ STILL BEHIND THE PAYWALL
The 2013 Ford Focus repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ford Focus — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →