2022 MG ZS

ElectricFWDAUTOMATICgas
5-Year Cost of Ownership
$8,105 maintenance + known platform issues
~$1,621/yr · 140¢/mile equivalent · $5,005 maintenance + $2,400 expected platform issues
Compare this engine
vs
1.5L I4 15S4C
vs
Electric 51kWh
vs
1.5L I4
Common Problems & Known Issues

The 2022 MG ZS is a budget-friendly crossover with decent bones but premature suspension wear and transmission mount failures that punch above their weight class. Chinese manufacturing quality shows in bushings and control arms that don't hold up to American road conditions.

Premature Control Arm Bushing Failure (All Positions)

Common · medium severity
Typical onset: 25,000-50,000 mi
Symptoms: Clunking over bumps, especially speed bumps, Steering wander or vague center feel, Uneven tire wear on inside edges, Vibration through steering wheel at highway speeds
Fix: Front upper and lower bushings fail first, rears follow. Most shops replace entire control arms rather than press new bushings due to odd sizing. Budget 3-4 hours for fronts, 2.5 hours for rears. Alignment mandatory after.
Estimated cost: $800-1,400

Transmission Mount Collapse (CVT Models)

Common · medium severity
Typical onset: 30,000-60,000 mi
Symptoms: Harsh clunk when shifting from Park to Drive, Excessive engine movement visible from outside during acceleration, Vibration at idle in Drive that disappears in Neutral, Lurching sensation during moderate acceleration
Fix: The rubber isolator separates or tears completely. Access is tight — requires partial subframe drop or creative maneuvering. 2.5-3.5 hours labor. OEM part quality is marginal; some techs upgrade to polyurethane aftermarket.
Estimated cost: $450-750

Rear Trailing Arm Bushing Deterioration

Occasional · medium severity
Typical onset: 40,000-70,000 mi
Symptoms: Rear end feels unstable during lane changes, Audible thump from rear suspension over expansion joints, Rear tire feathering or scalloping, Car tracks slightly sideways after hitting pothole
Fix: Trailing arm bushings crack and split prematurely, especially in cold climates. Most replace entire trailing arm assembly since bushings aren't sold separately by many suppliers. 2-2.5 hours per side including alignment check.
Estimated cost: $600-950

ABS Pump/Module Failure

Occasional · high severity
Typical onset: 35,000-65,000 mi
Symptoms: ABS and traction control warning lights illuminated, Grinding or buzzing noise from ABS module at startup, Extended brake pedal travel or soft pedal feel, Complete loss of ABS function with hard pedal and grabby brakes
Fix: Continental ABS units used have moisture intrusion issues in North American climates. Module requires bleeding entire system afterward. 2-3 hours including proper bleed procedure. Programming required at dealer or with proper scan tool.
Estimated cost: $1,200-2,100

Transmission Oil Cooler Line Leaks (CVT)

Occasional · medium severity
Typical onset: 45,000-80,000 mi
Symptoms: Pink or red fluid spots under front of vehicle, Transmission temperature warning light, Harsh or delayed shifting when hot, Burnt transmission fluid smell
Fix: Cooler line fittings at radiator or transmission crack due to vibration and heat cycling. Lines corrode at crimp points. Replacing lines takes 1.5-2 hours; if cooler itself is compromised, add another hour. Flush and refill CVT fluid mandatory.
Estimated cost: $400-800

Front CV Axle Boot Tears and Axle Failure

Occasional · medium severity
Typical onset: 50,000-85,000 mi
Symptoms: Clicking or popping during tight turns, Grease splatter on inside of wheel, Vibration during acceleration, Clunking when changing from reverse to drive
Fix: Boot quality is poor; tears allow contamination and grease loss. Once clicking starts, joint is done. Replace both sides together to avoid comeback in 10,000 miles. 2.5-3 hours for the pair.
Estimated cost: $500-850
Owner tips
  • Inspect all suspension bushings at every oil change after 25,000 miles — catching tears early saves money
  • CVT fluid should be changed at 30,000 miles regardless of 'lifetime fill' claim; prevents cooler and mount issues
  • Keep undercarriage clean in salt states; corrosion accelerates control arm and trailing arm bolt seizing
  • Use OEM or premium aftermarket control arms; cheap offshore replacements fail faster than originals
Buy only if you can wrench yourself or have a trusted indie shop — suspension components won't last, and dealer support for this brand is thin on the ground.
AI-assisted summary drawn from NHTSA recall data, our labor-times database, and platform knowledge. Not a substitute for a pre-purchase inspection on a specific vehicle.
No labor entries for this vehicle.
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →