P1507moderate severityPowertrain

Idle Control System Malfunction Fail Safe

on 2021 Subaru Impreza 2.0L H4 · AWD

What this code means

The PCM has entered failsafe mode for the idle control system. The idle speed control cannot maintain target idle and has exceeded the correction range, triggering a failsafe idle speed that may be higher or lower than normal.

Symptoms

  • Check Engine Light
  • Idle speed fixed at failsafe value
  • Rough or unstable idle
  • Engine may stall
  • Poor idle quality

Common causes

  • Large vacuum leak
  • Faulty idle air control valve
  • Dirty throttle body restricting airflow
  • Carbon buildup in IAC passages
  • Intake manifold gasket leak

Diagnostic steps

  1. Perform smoke test for vacuum leaks
  2. Clean throttle body and IAC passages
  3. Test IAC valve operation
  4. Check intake manifold gaskets
  5. Monitor IAC duty cycle on scan tool

Repair notes

Locate and repair vacuum leaks; clean the throttle body and IAC system.

Other Powertrain codes on this vehicle

⚠ STILL BEHIND THE PAYWALL
The 2021 Subaru Impreza repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Subaru Impreza — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →