U2000moderate severityNetwork
Network Configuration Error
on 2007 Subaru Outback 3.0L H6 · AWD
What this code means
General network configuration error detected. Module network settings do not match vehicle configuration.
Symptoms
- Feature not working despite being equipped
- Module not recognized on network
- System not initializing properly
- As-built configuration mismatch
Common causes
- Incorrect module configuration after replacement
- Wrong module installed
- Vehicle configuration not programmed after service
- Module needs VIN programming
- As-built data not transferred
Diagnostic steps
- Verify module part number for vehicle
- Check as-built configuration data
- Program module with correct vehicle configuration
- Transfer VIN and calibration data
- Check for required module initialization procedure
Repair notes
Module needs to be configured for this specific vehicle. Program with correct as-built data and VIN.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus