P3220moderate severityPowertrain

Electric Motor/Generator A Temperature Sensor Circuit

on 2010 Toyota Highlander 3.3L V6 Hybrid · AWD

What this code means

The temperature sensor for the primary motor/generator (MG1) is reporting values outside the expected range.

Symptoms

  • Hybrid/EV warning light
  • Motor power derated
  • Reduced acceleration
  • Limp mode
  • Motor protection mode active
  • Regenerative braking limited

Common causes

  • Faulty motor temperature sensor
  • Corroded sensor connector
  • Sensor wiring damage
  • Sensor shorted internally
  • ECU analog input failure

Diagnostic steps

  1. Read motor temperature PID
  2. Compare sensor reading to infrared measurement
  3. Test sensor resistance vs temperature spec
  4. Inspect connector and wiring
  5. Check for shorts in wiring harness

Repair notes

Replace motor temperature sensor. Requires partial disassembly of motor housing on some designs.

Other Powertrain codes on this vehicle

⚠ STILL BEHIND THE PAYWALL
The 2010 Toyota Highlander repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Toyota Highlander — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →