2007-2011 Jeep Compass Brake Light Switch Torque Specs

2.0L I4

Applies to 2007, 2008, 2009, 2010, and 2011 Jeep Compass

Labor Time:0.5 hours

Torque Values (8 specifications)

Component	Nm	lb-ft	Notes
⚠️ Bleeder Screw	10	7	Do not overtighten \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Bracket Bolts	102	75	—
⚠️ Caliper Bolts	88	65	Use thread locker
⚠️ Caliper Bracket Bolts - Front	120	88	Threadlocker recommended \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Caliper Slide Pin Bolts	35	26	Apply silicone brake grease \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Line Fittings	20	15	Use line wrench
Mounting Bolts	27	20	—
⚠️ Wheel Lug Nuts	140	103	Torque in star pattern \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

Other Jobs with Torque Specs

Common Questions

What is the torque spec for brake light switch on a 2007-2011 Jeep Compass?

The primary torque specification for brake light switch on a 2007-2011 Jeep Compass is 10 Nm (7 lb-ft). Note: Do not overtighten | ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL

How many torque specs are there for Jeep Compass brake light switch?

There are 8 torque specifications for brake light switch on the 2007-2011 Jeep Compass 2.0L I4, covering all related fasteners and components.