P2762high severityPowertrain
Torque Converter Clutch Pressure Control Solenoid Control Circuit Low
on 2008 Audi Q7 3.0L Supercharged V6 · AWD
What this code means
Low voltage/current on the TCC pressure control solenoid circuit.
Symptoms
- TCC shudder
- Check engine light
- Harsh TCC engagement
Common causes
- Short to ground
- Solenoid fault
- Wiring damage
Diagnostic steps
- Measure solenoid circuit voltage
- Check for shorts
Repair notes
Replace TCC solenoid or repair wiring.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1