P0342high severityPowertrain
Camshaft Position Sensor A Circuit Low Bank 1
on 2009 Audi R8 5.2L V10 (Gen 1, 525hp) · AWD
What this code means
Low or no signal from CMP sensor A Bank 1.
Symptoms
- Check Engine Light
- Hard starting
- No start
Common causes
- Faulty sensor
- Short to ground
- Wiring issue
Diagnostic steps
- Test sensor
- Check for shorts
- Inspect wiring
Repair notes
Replace sensor or repair wiring.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1