ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free β†’
B0100

Immobilizer System General Malfunction

1992-1998 BMW 325i E36 2.5L I6 M50 πŸ‡·πŸ‡Ί

High SeverityBody

Description

A general fault detected in the engine immobilizer system. The immobilizer prevents engine starting without a recognized key or transponder.

Symptoms

  • Engine cranks but will not start
  • Security/immobilizer warning light on
  • Key not recognized
  • Intermittent no-start condition

Common Causes

  • Faulty key transponder
  • Immobilizer antenna ring failure
  • Immobilizer control module fault
  • Key not programmed to vehicle
  • Weak key battery

Diagnostic Steps

  1. Try spare key
  2. Check immobilizer warning light pattern
  3. Scan immobilizer module for specific codes
  4. Test transponder ring antenna
  5. Verify key programming status

Repair Notes

Try spare key first. Reprogram key to immobilizer if needed. Replace antenna ring or immobilizer module if faulty.

Related Codes

B0101Immobilizer Transponder Signal Not DetectedB0102Immobilizer Transponder Authentication FailureB0103Immobilizer Antenna Ring Circuit

Other Body Codes

B0100 on Other Vehicles

Common Questions

What does code B0100 mean on a 1992-1998 BMW 325i E36?

B0100 stands for "Immobilizer System General Malfunction". A general fault detected in the engine immobilizer system. The immobilizer prevents engine starting without a recognized key or transponder.

What are the symptoms of B0100 on a BMW 325i E36?

Common symptoms of B0100 include: Engine cranks but will not start, Security/immobilizer warning light on, Key not recognized, Intermittent no-start condition.

What causes B0100 on a 1992-1998 BMW 325i E36?

Common causes of B0100 include: Faulty key transponder, Immobilizer antenna ring failure, Immobilizer control module fault, Key not programmed to vehicle, Weak key battery.

View Labor Times | View Torque Specs | View Fluid Specs