Electric Power Steering Motor Circuit
2005-2009 Ferrari F430 4.3L V8 🇷🇺
Description
General malfunction in the electric power steering assist motor circuit.
Symptoms
- Power steering warning light
- Heavy steering
- Steering assist intermittent
- EPS warning message on dash
Common Causes
- EPS motor failure
- Motor connector corrosion
- Wiring harness damage
- EPS control module failure
Diagnostic Steps
- Check EPS motor connector for corrosion
- Test motor winding resistance
- Inspect wiring harness
- Check module power supply and ground
- Command motor with scan tool if supported
Repair Notes
Replace EPS motor or EPS assembly. Some vehicles have motor integrated into steering rack or column.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0200 on Other Vehicles
Ferrari 296 GTB
2022-2024 3.0L V6 Hybrid
Ferrari 296 GTS
2022-2024 3.0L V6 Hybrid
Ferrari 360 Challenge Stradale
2003-2005 3.6L V8
Ferrari 360 Modena
1999-2005 3.6L V8
Ferrari 430 Scuderia
2007-2009 4.3L V8
Ferrari 456 GT
1993-2003 5.5L V12
Ferrari 458 Italia
2009-2015 4.5L V8
Ferrari 458 Speciale
2013-2015 4.5L V8
Common Questions
What does code C0200 mean on a 2005-2009 Ferrari F430?
C0200 stands for "Electric Power Steering Motor Circuit". General malfunction in the electric power steering assist motor circuit.
What are the symptoms of C0200 on a Ferrari F430?
Common symptoms of C0200 include: Power steering warning light, Heavy steering, Steering assist intermittent, EPS warning message on dash.
What causes C0200 on a 2005-2009 Ferrari F430?
Common causes of C0200 include: EPS motor failure, Motor connector corrosion, Wiring harness damage, EPS control module failure.