P1742high severityPowertrain
Torque Converter Clutch Solenoid Failed On
on 2004 Ford Taurus 3.0L V6 Duratec · FWD
What this code means
The TCC solenoid has failed in the on/engaged position. The torque converter clutch remains engaged when it should not be, which can cause the engine to stall when coming to a stop (similar to a manual transmission with the clutch engaged).
Symptoms
- Engine stalls when stopping in Drive
- Harsh engagement at low speeds
- Vehicle shudders at slow speeds
- Check Engine Light
Common causes
- TCC solenoid stuck mechanically on
- Electrical fault keeping solenoid energized
- Valve body TCC apply valve stuck
- Contaminated transmission fluid
Diagnostic steps
- Test TCC solenoid — it should de-energize when commanded off
- Check solenoid wiring for shorts to power
- Check valve body for stuck TCC valve
- Monitor TCC status on scan tool during deceleration
Repair notes
Replace TCC solenoid. Inspect valve body. May require transmission pan removal.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1