Fuel Volume Regulator Control Circuit Range/Performance
2000-2012 Mitsubishi Eclipse 2.4L I4 🇷🇺
Description
The fuel volume regulator is not operating within expected parameters. The PCM monitors fuel pressure and compares it to the commanded value.
Symptoms
- Check Engine Light
- Engine surge
- Unstable idle
- Reduced power
Common Causes
- Fuel volume regulator sticking
- Low fuel pressure
- Contaminated fuel
- Wiring issue
Diagnostic Steps
- Monitor fuel pressure with scan tool
- Compare commanded vs actual pressure
- Inspect regulator for debris
- Check wiring harness
Repair Notes
Clean or replace fuel volume regulator.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
- P0016Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor A
P0002 on Other Vehicles
Mitsubishi 3000GT
1991-1999 3.0L V6
Mitsubishi 3000GT VR-4
1991-1999 3.0L Twin Turbo V6
Mitsubishi 3000GT VR-4
1991-1999 3.0L V6 Twin Turbo
Mitsubishi Colt JP
2002-2012 1.3L I4 4A90
Mitsubishi Colt JP
2002-2012 1.5L I4 4A91
Mitsubishi Delica D:5
2019-2025 2.2L I4 Turbo Diesel 4N14
Mitsubishi Diamante
1992-1996 3.0L V6
Mitsubishi Diamante
1997-2004 3.5L V6
Common Questions
What does code P0002 mean on a 2000-2012 Mitsubishi Eclipse?
P0002 stands for "Fuel Volume Regulator Control Circuit Range/Performance". The fuel volume regulator is not operating within expected parameters. The PCM monitors fuel pressure and compares it to the commanded value.
What are the symptoms of P0002 on a Mitsubishi Eclipse?
Common symptoms of P0002 include: Check Engine Light, Engine surge, Unstable idle, Reduced power.
What causes P0002 on a 2000-2012 Mitsubishi Eclipse?
Common causes of P0002 include: Fuel volume regulator sticking, Low fuel pressure, Contaminated fuel, Wiring issue.